Silhouette Transfer Tape Application Instructions

Updated 5 years ago by Nathan Reedy

Application Instructions

After your vinyl has been cut and unloaded from the Silhouette machine, weed away excess vinyl until only your design remains on the backing sheet.
Cut a piece of the transfer tape slightly larger than your design and remove the transfer tape liner.
Postion transfer tape on top of your vinyl design and press firmly.
The vinyl should now be adhered to the transfer tape as you remove the vinyl from the backing.
Position your design onto the desired surface.
Press down firmly with a flat-edged tool (such as a silhouette scraper) over the entire design to remove any air bubbles.
Peel away transfer tape.