EasyTrans Application Instructions

Updated 2 years ago by Nathan Reedy

1. Pre-press garment; 5-7 seconds.
2. Set temperature at 325-350 degrees Fahrenheit.
3. Set pressure to 55-60 lbs (heavy pressure)
4. Place transfer in the desired location, ink side down. Do NOT cover with a non stick sheet or use a pressing pillow for application.
5. Print 7 seconds.
6. Peel immediately while hot, in one continuous, smooth, rapid motion.

Related Articles

• EasyTrans Transfer Application Instructions
• EasyTrans Custom Transfers
• VinylBlock Application Instructions