Free Shipping Offer >
Toggle Nav
Cart
  • Favorites
    • Products
    Account
    Help
  • Help
    • IT'S TIME TO SAVE!    $10 off $99+ use JAN10  |  $25 off $199+ use JAN25  |  $50 off $399+ use JAN50

    All Categories ​>​ ​Product Help ​ > ​ ​Transfer Vinyls ​ > ​ ​Transfer Vinyl Home Iron Application Instructions ​>​ Siser Sub Block Home Iron Application Instructions

    Siser Sub Block Home Iron Application Instructions

    Updated 4 years ago by Nathan Reedy

    Application Instructions

    1. 100% cotton, Poly/cotton blends, 100% polyester
    2. Set iron dial between Cotton and Linen
    3. Cover design with Kraft paper or non-stick cover sheet
    4. Place on flat, hard surface (ironing board not recommended)
    5. Press iron with medium/firm pressure (do not slide iron)
    6. Press each section of design for 10-15 seconds
    7. If areas of design lift after application, replace cover sheet and re-press for 10 - 15 seconds
    8. Peel carrier hot or cold
    9. Wait 24 hours before first wash.