Siser PSV Pattern Vinyl

Updated 3 years ago by Nathan Reedy

Application Instructions

Place EasyPSV® with the liner side down and cut your design. (DO NOT reverse/mirror your design.)
Weed excess vinyl.
Remove the application tape’s paper liner and place tape on top of EasyPSV.
Burnish with a squeegee.
Lift the application tape and EasyPSV away from the paper liner.
Place the application tape on your desired object.
Burnish with a squeegee to fully adhere the design.
Gently peel away the application tape, leaving just your EasyPSV design on the object.