Free Shipping Offer >
Toggle Nav
Cart
  • Favorites
    • Products
    Account
    Help
  • Help
    • IT'S TIME TO SAVE!    $10 off $99+ use JAN10  |  $25 off $199+ use JAN25  |  $50 off $399+ use JAN50

    All Categories ​>​ ​Product Help ​ > ​ ​Heat Applied Graphics ​ > ​ ​Heat Transfer Application Instructions ​>​ Lumi-Trans Application Instructions

    Lumi-Trans Application Instructions

    Updated 4 years ago by Nathan Reedy

    1. Set temperature at 375-385 degrees Fahrenheit.
    2. Set pressure at medium to heavy. A pressing pillow or perfect pad may be needed to achieve the right amount of pressure.
    3. Print 10 to 12 seconds.
    4. Peel immediately while hot, in one continuous, smooth, rapid motion.

    These instructions might vary depending on the transfer machine being used for the application. Variances in time, pressure, and/or temperature might be necessary. Proper temperature testing of the heating element is strongly recommended.