Free Shipping Offer >
Toggle Nav
Cart
  • Favorites
    • Products
    Account
    Help
  • Help
    • CLEARANCE SALE   Huge savings up to 70%    SHOP NOW >

    All Categories ​>​ ​Product Help ​ > ​ ​Heat Applied Graphics ​ > ​ ​Heat Transfer Application Instructions ​>​ High Definition - Dark Application Instructions for Manual Heat Press

    High Definition - Dark Application Instructions for Manual Heat Press

    Updated 5 years ago by Nathan Reedy

    1. Set temperature at 375-385 degrees Fahrenheit.
    2. Set pressure at medium to heavy.
    3. Print 10 to 12 seconds.
    4. Rub the back of the design for 5 seconds.
    5. Peel slowly.

    These instructions might vary depending on the transfer machine being used for the application. Variances in time, pressure, and/or temperature might be necessary. Proper temperature testing of the heating element is strongly recommended.