Full Color (Oversize) Application Instructions

Updated 3 years ago by Nathan Reedy

Place garment on platen with the collar at the top of the press. Make sure collar is off the platen.
Place transfer on the garment so that the image begins approximately 1" from the top edge of the platen.
Close machine and press for 350 degrees for 7 seconds, heavy pressure.
Open machine and immediately peel paper from left to right stopping approximately 2" before reaching the bottom of the platen. This leaves a strip where the paper remains adhered to the garment.
Move the garment, so the bottom portion of the shirt is now on the top edge of the platen. Position the garment so the un-pressed portion of the design is completely within the platen area.
Repeat step #3.
Open the machine and immediately peel all of the paper away from the garment.