Lasersoft Easy Peel Transfer Paper Application Instructions

Updated 5 years ago by Nathan Reedy

General Use

For light colored garments only, Designed for both fuser oil and oil-less laser printers and copiers.

Application Instructions

Design or select your image on the computer.
Print the image in reverse/mirrored format using a heavy paper mode.
Set heat press at 375 degrees with medium-heavy pressure.
Pre-heat garment for 10-15 seconds to remove moisture.
Place transfer face down and press for 25 seconds.
For best results leave on the heat press, wait 10-15 seconds and then peel the paper in a smooth even motion.
To improve the feel or 'hand', stretch the garment in all directions while still hot.

Tips & Notes

Manufacturer and seller are not responsible for damaged caused by misuse of this paper.