Free Shipping Offer >
Toggle Nav
Cart
  • Favorites
    • Products
    Account
    Help
  • Help
    • IT'S TIME TO SAVE!    $10 off $99+ use JAN10  |  $25 off $199+ use JAN25  |  $50 off $399+ use JAN50

    3D Puff Application Instructions

    Updated 5 years ago by Nathan Reedy

    1. Set temperature at 330 degrees Fahrenheit.
    2. Set pressure at heavy.
    3. Print 8 seconds.
    4. Peel gently and immediately while hot.

    These instructions might vary depending on the transfer machine being used for the application. Variances in time, pressure, and/or temperature might be necessary. Proper temperature testing of the heating element is strongly recommended.