Hot Peel (Oversize) Application Instructions

Updated 2 years ago by Nathan Reedy

Place garment sideways on platen with neck band just outside the left edge of the lower platen.
Place transfer on the garment so that the image begins approximately 1" inside the left edge of the platen.
Close machine and press for 390 degrees for 10 seconds.
Open machine and immediately peel paper from left to right stopping approximately 2" before reaching the right edge of the platen. This leaves a strip where the paper remains adhered to the garment.
Move the garment and the transfer to the left being careful to leave the paper adhered to the 2" strip. The garment should come to rest with the adhered portion of the design slightly inside the left edge of the bottom platen and the un-pressed portion of the design totally within the platen area.
Repeat step #3.
Open the machine and immediately peel all of the paper away from the garment.