ColorPro UV DTF 3D Stickers Application Instructions
Application Instructions
- Clean Your Surface - Make sure the surface you've chosen is perfectly clean and ready. Clean with a lint-free cloth and isopropyl alcohol or mild surface cleaner. The surface should be completely dry, smooth and free of oils or dust.
- Application Instructions - Carefully peel the backing from the sticker, avoiding contact with the adhesive side as much as possible. Align the sticker where you want it, then gently press down starting from the center and working your way outward to prevent air bubbles. Use a scraper tool or the edge of a credit card to press the sticker down firmly onto the surface. Apply even pressure over the entire sticker, especially around the edges, to ensure it fully adheres.
- Peel Carrier Sheet - Once the sticker is firmly in place, slowly peel back the carrier sheet ensuring all elements of the design have been released. If part of the design lifts from your product, lay the carrier sheet back down and apply pressure to that part of the design before peeling again.
- Care Instructions - Wait at least 48 hours after the sticker has been applied before washing. The item should only be placed in the top rack of the dishwasher and washed using a regular heat cycle. To ensure the longevity of the sticker, hand washing is best.