Sparkleberry Adhesive Vinyl Application Instructions
Application Instructions
- Place Sparkleberry vinyl with liner side down and cut your design (DO NOT reverse/mirror your design.)
- Weed excess vinyl.
- Cut a piece of Oracal Tape slightly larger than your design.
- Remove the application tape's paper liner.
- Place the tape on top of Sparkleberry vinyl and burnish with a squeegee
- Lift the application tape and Sparkleberry vinyl away from the paper liner to expose the permanent adhesive
- Place the application tape on your desired object and burnish with a squeegee to fully adhere the design
- Gently peel away the application tape, leaving just your vinyl design on the object
- Download Full Product Instructions.