Texprint Sublimation Paper on a Pet Collar

Updated 3 years ago by Nathan Reedy

Application Instructions

Set temperature to 400 degrees Fahrenheit.
Set timer to 60 seconds.
Set Pressure at medium.
Print a mirror image onto Texprint Paper.
Place the white part of the collar face down on the paper.
Put a piece of tape across the backside of the collar to attach the tape.
Put a blank sheet of paper on heat press platen to keep it clean.
Place the collar on the platen with the back of the paper face up and cover with a non stick sheet.
Make sure the buckle for the collar is off the platen away from the heat.
Press at 400 degrees F for 60 seconds with medium pressure.
Remove paper immediately when hot.