Free Shipping Offer >
Toggle Nav
Cart
  • Favorites
    • Products
    Account
    Help
  • Help
    • BLACK FRIDAY DEALS!    Save Now Thru Cyber Monday.    VIEW ALL DEALS >

    All Categories ​>​ ​Product Help ​ > ​ ​DTF Equipment & Supplies ​ > ​ ​DTF Inks & Supplies Application Instructions ​>​ Ecofreen DTF Hot Peel Film Application Instructions

    Ecofreen DTF Hot Peel Film Application Instructions

    Updated 1 year ago by Nathan Reedy

    Application Instructions

    1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
    2. Apply hot melt powder evenly and remove the excess powder.
    3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315°F, 1min).
    4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
    5. After the first press:
      1. Option 1: Wait for 4-6 seconds and remove the film gently.
      2. Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently.
    6. Heat press again at 330°F 5-10sec. with medium pressure to enhance softer hand feel.

    Warning

    • Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.
    • Please wear Personal Protective Equipment (eyeglasses, mask, and gloves) when working with DTF products. The fumes from curing the powder can be hazardous.