Chat 
Lo Melt heat transfers, specially designed for technical fabrics like performance wear and premium garments. With its low temperature application, Lo Melt ensures worry-free printing without the risk of scorching expensive items. Ideal for water-resistant products and sublimated polyester, Lo Melt opens up decoration possibilities for items previously deemed too difficult to press.
| SKU | SUP-LM |
|---|---|
| Print Minimum | 10 |
Supacolor was created with the mission to make high-quality heat transfers so fast and easy that anyone with a heat press can become a professional printer.
Low Application Temp
Designed for those hard-to-press fabrics. With its low temperature, you can forget about the risk of heat marks and print with confidence.
Superior Color
Featuring brilliant colors and epic, bright whites, turn complex artwork into easy, everyday jobs on both light and dark fabrics.
No Cracking or Fading
Our certification from an independent lab is one of the many reasons we’re known as the world’s best heat transfer!
Eco-Friendly
Eco-Friendly Water-based sustainable alternative to PVC, Supacolor inks don’t have harsh or toxic chemicals. Transfers come on recyclable transfer paper.
Supacolor Lo Melt/Lo Melt Blocker Application Instructions
1. Set Temperature and Time
- 270F (160C)
- 12-15 seconds
2. Lay Garment On Platen
Keep the collar off the press and make sure you have equal amounts of fabric on both sides of the press.
3. Set Pressure
Tighten dial until the press won’t close. Loosen dial progressively until the press closes
4. Pre-Press: 5-8 Seconds
Prepressing releases moisture from the garment ensuring good contact. This is very important when pressing. Repeat this step if there is still steam.
5. Place Supacolor Lo Melt Transfer
Position the transfer on the garment. Lay Non-stick sheet or parchment paper over the Supacolor. Keep print away from pockets and collar.
6. Press 15 Seconds
7. Hot Peel Immediately
Hot peel immediately from a corner in one smooth motion. Peel with confidence and without hesitation. Hold down garment with your free hand for better control.
8. Post-Press: 4 Seconds
Use a teflon sheet or parchment to seal the edges of the Lo Melt transfer.