Texprint Sublimation Paper on a Backplate w Case Included

Updated 3 years ago by Nathan Reedy

Application Instructions

Set temperature to 400 degrees Fahrenheit.
Set timer to 1 minute (60 seconds).
Set Pressure at medium.
Remove protective film from product (backing plate).
Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
Put a blank sheet of paper on heat press platen to keep it clean.
Place substrate face down on the heat press (metal surface up).
Cover with a non stick sheet.
Press at 400 degrees F for 1-3 minutes with medium pressure
Remove immediately from press once finished and peel hot.
When backplate is cool, remove the paper covering the adhesive on the case.
Align the backplate within the indentation and adhere to phone case.