JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
All Categories > Product Help > Sublimation > Sublimation Application Instructions
Application Instructions Set upper and lower oven temperature to 383° Fahrenheit. Set oven timer to 12 minutes. Print a mirror image onto Texprint Paper. Wrap the printed image around product and sec…
Updated 7 months ago by Nathan Reedy
Application Instructions Set upper and lower oven temperature to 365° Fahrenheit. Set oven timer to 6 minutes. Print a mirror image onto Texprint Paper. Wrap the printed image around product and secu…
Set temperature to 375 degrees Fahrenheit. Set timer to 30 seconds. Set Pressure at heavy. Print a mirror image onto Chromablast Paper with Chromablast Ink. Place paper face down on garment. The garm…
Updated 5 years ago by Nathan Reedy
Application Instructions Set upper and lower oven temperature to 383° Fahrenheit. Set oven timer to 6 minutes. Print a mirror image onto Texprint Paper. Wrap the printed image around product and secu…
Application Instructions Set upper and lower oven temperature to 365° Fahrenheit. Set oven timer to 10 minutes. Print a mirror image onto Texprint Paper. Wrap the printed image around product and sec…
General Use Subli-Print is for 100% cotton, uncoated polyester, and fabric blends. For use with sublimation inks to achieve a full color image. Printing Print the image right reading. Trim the excess…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 60 seconds. Set pressure at medium. Remove protective film from the product (if applicable). Print a mirror image onto…
Updated 5 months ago by Nathan Reedy
Application Instructions Set temperature to 350 degrees Fahrenheit. Set timer to 80-100 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper.. Wrap the printed image around produ…
Updated 3 years ago by Nathan Reedy
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 30-45 seconds minutes. Set Pressure at medium. Remove protective film from the product (if applicable). Print a mirror…
Application Instructions Set temperature to 350 degrees Fahrenheit. Set timer to 80-100 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Wrap the printed image around produc…
Updated 2 years ago by Nathan Reedy
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 30 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Place paper face down on can protector (…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 1-3 minutes. Set Pressure at medium. Remove protective film from product. Print a mirror image onto Texprint Paper. Im…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 45-55 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Place paper face down on garment. The…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 6-8 minutes depending on tile size. The larger the tile, the longer the time should be. Set Pressure at light. Use cau…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 75 seconds. Set Pressure at light. Print a mirror image onto Texprint Paper. Place paper face down on door mat. Cover…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 30 seconds. Set Pressure at medium. Remove protective film from product (if applicable). Print a mirror image onto Tex…
Application Instructions. Set temperature to 385-400 degrees Fahrenheit. Set timer to 90 seconds. Set Pressure at medium. Remove protective film from product. Print a mirror image onto Texprint Paper…
Application Instructions. Set temperature to 356 degrees Fahrenheit. Set timer to 120 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Place paper face down on garment. The…
Application Instructions Set temperature to 419 degrees Fahrenheit. Set timer to 55-65 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Place paper face down on garment. The…
Application Instructions Set temperature to 356 degrees Fahrenheit. Set timer to 120 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Insert pressing pillow inside the tote…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 60 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper using our 2 sided template. Image should…
Application Instructions Set temperature to 356 degrees Fahrenheit. Set timer to 50-60 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Place the substrate face down on one…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 60 seconds. Set Pressure at medium. Remove protective film from product (if applicable). Print a mirror image onto Tex…
Application Instructions Turn the 3D Vacuum Heat press on. Set the heating button so both the top and bottom heating lights are on. (2 red lights will be showing). Set the Temperature to 338 degrees…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 60 seconds. Set Pressure at medium. Print a non-mirror image onto Texprint Paper. Image should be larger than the subs…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 60 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Place the substrate face down on the tra…
Application Instructions Set temperature to 356 degrees Fahrenheit. Set timer to 240 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Image should be larger than the substra…
Application Instructions Set temperature to 356 degrees Fahrenheit. Set timer to 120 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Image should be larger than the substra…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 45 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Place paper face down on bib/ apron. Cov…
Application Instructions Set temperature to 385 degrees Fahrenheit. Set timer to 45-60 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Use a pressing pillow underneath the…
Application Instructions Make sure the top vacuum tray is in the 3D Vacuum Heat Press and the tubing is connected to the tray. Press the heating button so both the top and bottom heater are active. S…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 70 seconds. Set Pressure at medium. Remove protective film from product. (if applicable). Print a mirror image onto Te…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 60 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Image should be larger than the substrat…
Application Instructions Set temperature to 380-400 degrees Fahrenheit. Set timer to 120 seconds. Set Pressure at heavy. Print a mirror image onto Texprint Paper. Trim the edges of the image and wrap…
Application Instructions Set temperature to 356 degrees Fahrenheit. Set timer to 120 seconds. Set Pressure at light. Use caution as the glass can crack with too much pressure. Print a NON-mirror imag…
Application Instructions Set temperature to 385 degrees Fahrenheit. Set timer to 60-80 seconds. Set Pressure at light-medium. Print a mirror image onto Texprint Paper. Use a pressing pillow underneat…
Application Instructions Turn the 3D Vacuum Heat press on. Make sure the small top tray is in place with the tubing connected to the tray. Set the heating button so both the top and bottom heating li…
Application Instructions Set temperature to 356 degrees Fahrenheit. Set timer to 120 seconds. Set Pressure at light-medium. Print a mirror image onto Texprint Paper. Use a pressing pillow underneath…
Application Instructions Set temperature to 375 degrees Fahrenheit. Set timer to 60-120 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. If needed, use a pressing pillow und…
Application Instructions Turn the 3D Vacuum Heat press on. Set the heating button so both the top and bottom heating lights are on. (2 red lights will be showing). Set the Temperature to 392 degrees…
Application Instructions Set temperature to 356 degrees Fahrenheit. Set timer to 50 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Place the substrate face down on one of…
Application Instructions Set temperature to 356 degrees Fahrenheit. Set timer to 45 seconds. Set Pressure at medium. Remove protective film from product (if applicable). Print a mirror image onto Tex…
Updated 2 months ago by Nathan Reedy
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 1-3 minutes. Set Pressure at medium. Remove protective film from product (if applicable). Print a mirror image onto Te…
Application Instructions Set temperature to 375 degrees Fahrenheit. Set timer to 60 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Use a pressing pillow underneath the pro…
Application Instructions Set temperature to 356 degrees Fahrenheit. Set timer to 8-9 minutes (540 seconds). Print a mirror image onto Texprint Paper. Wrap the printed image around the product and sec…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 20 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Image should be larger than the substrat…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 45-55 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Flip all sequins over to so the white…
Application Instructions Set temperature to 356 degrees Fahrenheit. Set timer to 60-180 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Image should be larger than the subs…
Application Instructions Set temperature to 356 degrees Fahrenheit. Put a blank sheet of paper on heat press pad to keep it clean. Place silicone sheet on top of paper and preheat silicone sheet for…
Application Instructions Set temperature to 356 degrees Fahrenheit. Set timer to 120 seconds. Set Pressure at light. Print a mirror image onto Texprint Paper. Place paper face down on slipper. Secure…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 30-45 seconds. Set Pressure at medium. Remove protective film from the product (if applicable). Print a mirror image o…
Updated 1 year ago by Nathan Reedy
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 5-7 minutes (300-420 seconds). Print a mirror image onto Texprint Paper. . Wrap the printed image around product and s…
Application Instructions Set temperature to 350 degrees Fahrenheit. Set timer to 80-100 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. . Wrap the printed image around prod…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 40 seconds. Set Pressure at light. Print a mirror image onto Texprint Paper. Image should be larger than the substrate…
Application Instructions Set temperature to 380 degrees Fahrenheit. Set timer to 120 seconds. Set Pressure at medium and a place a pressing pillow on the bottom pad of the heat press. Print a mirror…
Application Instructions Set temperature to 385 degrees Fahrenheit. Set timer to 2 minutes. Set Pressure at medium. Print a mirror image onto Texprint Paper. Image should be larger than the substrate…
Application Instructions Turn the 3D Vacuum Heat press on. Make sure the top tray is in the heat press, and the tubing is connected underneath the tray. Set the Temperature to 400 degrees F (200 degr…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 60 seconds. Set Pressure at medium. Remove protective film from product. Print a mirror image onto Texprint Paper. Ima…
Application Instructions Set temperature to 385 degrees Fahrenheit. Set timer to 70 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Image should be larger than the substrat…
Updated 1 month ago by Nathan Reedy
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 1 minute (60 seconds). Set Pressure at medium. Remove protective film from product (backing plate). Print a mirror ima…
Application Instructions Set temperature to 380-385 degrees Fahrenheit. Set timer to 180 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Image should be larger than the sub…
Application Instructions Set temperature to 375 degrees Fahrenheit. Set timer to 120 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Place the substrate face down on the tr…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 160 seconds. Set Pressure at light to medium. Print a mirror image onto Texprint Paper. Image should be larger than th…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 240-270 seconds. Set Pressure at heavy. Print a mirror image onto Texprint Paper. Trim the edges of the image and wrap…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 60 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Place paper face down on the face mask.…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 180-220 seconds. Set Pressure at light. Use caution as the glass can crack with too much pressure. Print a NON-mirror…
Application Instructions Set temperature to 380-400 degrees Fahrenheit. Set timer to 180 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Image should be larger than the sub…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 30-45 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Place paper face down on mouse pad (U…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 30 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Place paper face down on koozie (Use hea…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 60 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Place the white part of the collar face…
Application Instructions Set temperature to 350 degrees Fahrenheit. Set timer to 240 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Trim the edges of the image and wrap ar…
Application Instructions Use the large latte heating element. Set temperature to 350 degrees Fahrenheit. Set timer to 160 seconds. Set Pressure at heavy. Print a mirror image onto Texprint Paper. Tri…
Application Instructions Set temperature to 400 degrees Fahrenheit (200 C). Set timer to 5:30-7 minutes depending on the rock slate size. The larger the rock slate, the longer the time should be. Kee…
Application Instructions Set temperature to 356 degrees Fahrenheit. Set timer to 420 seconds (7 minutes) depending on the rock slate size. The larger the rock slate, the longer the time should be. Se…
Application Instructions Turn the 3D Vacuum Heat press on. Set the heating button so both the top and bottom heating lights are on. Set the Temperature to 200 degrees C and time to 13 minutes. Print…
Application Instructions Turn the 3D Vacuum Heat press on. Set the Temperature to 392 degrees F (200 degrees C) and time to 5-6 minutes. Set the heating button so both the top and bottom heating ligh…
Application Instructions Turn the 3D Vacuum Heat press on. Set the Temperature to 392 degrees F (200 degrees C) and time to 3:30 minutes. Set the heating button so both the top and bottom heating lig…
Application Instructions Set temperature to 360-400 degrees Fahrenheit. Set timer to 60-180 seconds. Set Pressure at medium. Print a mirror image onto Texprint Paper. Image should be larger than the…
Application Instructions Set temperature to 400 degrees Fahrenheit. Set timer to 36 seconds. Set Pressure at heavy. Print a mirror image onto Texprint Paper. Place sock(s) on platen with cardboard in…
