20oz Tumbler In A Sublimation Oven
Application Instructions
- Set upper and lower oven temperature to 365° Fahrenheit
- Set oven timer to 6 minutes.
- Print a mirror image onto Texprint Paper.
- Wrap the printed image around product and secure it with heat transfer tape.
- Slip your drinkware into the recommended shrink film sleeve.
- Apply heat to the shrink film using a heat gun until the film is tight on the item.
- Once the sublimation oven beeps confirming it has reached the appropriate temperature, place your item in
- the oven and close the door.
- Heat your product for 6 minutes at 365° F
- Remove immediately from oven once finished and peel hot. Use caution as the item will be very hot.
*A heat gun is required for irregular shaped drinkware. If printing on products with straight sides like a skinny tumbler, a heat gun is not needed, as the film will shrink with the heat from the oven.