Free Shipping Offer >
Toggle Nav
Cart
  • Favorites
    • Products
    Account
    Help
  • Help
    • IT'S TIME TO SAVE!    $10 off $99+ use JAN10  |  $25 off $199+ use JAN25  |  $50 off $399+ use JAN50

    All Categories ​>​ ​Product Help ​ > ​ ​Heat Applied Graphics ​ > ​ ​Heat Transfer Application Instructions ​>​ High Definition - Dark Application Instructions

    High Definition - Dark Application Instructions

    Updated 4 years ago by Nathan Reedy

    1. Set temperature at 365-385 degrees Fahrenheit.
    2. Set pressure at heavy. A pressing pillow or perfect pad may be needed to achieve the amount of pressure needed.
    3. Print 8 to 10 seconds.
    4. Peel immediately while hot, in one continuous, smooth, rapid motion.

    These instructions might vary depending on the transfer machine being used for the application. Variances in time, pressure, and/or temperature might be necessary. Proper temperature testing of the heating element is strongly recommended.