Texprint Sublimation Paper on a Rock Slate with a Heat Press

Updated 3 years ago by Nathan Reedy

Application Instructions

Set temperature to 356 degrees Fahrenheit.
Set timer to 420 seconds (7 minutes) depending on the rock slate size. The larger the rock slate, the longer the time should be.
Set Pressure at medium. Use caution as the rock slate can crack with too much pressure.
Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
Place substrate face up on the heat press.
Press at 356 degrees F for 420 seconds with medium pressure.
Remove immediately from press once finished and peel hot. Use caution as rock slate will be very hot.