Texprint Sublimation Paper A 2-Sided Ornament

Updated 5 months ago by Nathan Reedy

Application Instructions

Set temperature to 400 degrees Fahrenheit.
Set timer to 60 seconds.
Set pressure at medium.
Remove protective film from the product (if applicable).
Print a mirror image onto Texprint Paper. The image should be larger than the substrate.
If printing both sides of the ornament or keychain at the same time, spray the transfer paper with adhesive spray.
Place the substrate face down on one of the printed images, and fold the paper so the other printed image aligns with the other side of the substrate. Please note; you can print one side at a time and use transfer release tape to hold the printed image in place on your substrate.
Put a blank sheet of paper on heat press platen to keep it clean.
Place substrate on the bottom pad of the press.
Cover with a non stick sheet.
Press at 400 degrees F for 60 seconds with medium pressure
Remove immediately from press once finished and peel hot.
If you did not print both sides at the same time - repeat steps 7-12 once the substrate has cooled down.