Texprint Sublimation Paper on Sandstone Coasters

Updated 3 years ago by Nathan Reedy

Application Instructions

Set temperature to 356 degrees Fahrenheit.
Set timer to 60-180 seconds.
Set Pressure at medium.
Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
Put a blank sheet of paper on heat press platen to keep it clean.
Place substrate face up on the heat press, with the transfer paper on top. (We recommend printing 1 coaster at time).
Cover with a non stick sheet.
Press at 356 degrees F for 60-180 seconds with medium pressure.
Remove immediately from press once finished and peel hot.