Texprint Sublimation Paper on Subli-Fabricboard Products

Updated 2 years ago by Nathan Reedy

Application Instructions

Set temperature to 400 degrees Fahrenheit.
Set timer to 40 seconds.
Set Pressure at light.
Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
Put a blank sheet of paper on heat press platen to keep it clean.
Place substrate face up on the heat press, with the transfer paper on top.
Cover with a non stick sheet.
Press at 400 degrees F for 60 seconds with light pressure
Remove immediately from press once finished and peel hot.
Place a heavy object on air freshener for a few seconds while still hot to ensure the air freshener stays flat.
Repeat the steps above for the reverse side of the air freshener.
With a toothpick or sharp object, punch out the holes at the top of the air freshener.
Place a drop of colorless scented oil on each corner of the air freshener.