Texprint Sublimation Paper On A Pet Tag

Updated 3 years ago by Nathan Reedy

Application Instructions

Set temperature to 400 degrees Fahrenheit.
Set timer to 30-45 seconds minutes.
Set Pressure at medium.
Remove protective film from the product (if applicable).
Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
Put a blank sheet of paper on heat press platen to keep it clean.
Place substrate face down on the heat press (metal surface up).
Cover with a non stick sheet.
Press at 400 degrees F for 30-45 seconds with medium pressure.
Remove immediately from press once finished and peel hot.